800W High-Performance LED Grow Light Driver For Indoor Cultivation
Product Description:
Using the LED Grow Light Driver is simple. Just connect the driver
to your LED grow lights and power source, and the driver will take
care of the rest. The driver regulates the amount of power that is
supplied to your grow lights, ensuring that they receive the
optimal amount of energy for healthy and robust growth.
Whether you are an experienced gardener or just starting out, the
LED Grow Light Driver is an essential component for any indoor or
outdoor gardening setup. With its reliable performance, robust
construction, and easy-to-use design, this driver is sure to help
you achieve the best possible results with your LED grow lights.
Technical Parameters:
| MODEL | USP-800-54 | USP-800-54-B | USP-800-54-BA | NOTE |
INPUT | VOLTAGE | 120~277VAC | 120~277VAC | 120~277VAC | |
| FREQUENCY | 50~60Hz | 50~60Hz | 50~60Hz | |
| MAXIMUM INPUT CURRENT | 8.2A | 8.2A | 8.2A | |
| INRUSH CURRENT | ≤80A | ≤80A | ≤80A | |
| STANDBY POWER CONSUMPTION | ≤3w | ≤3w | ≤3w | |
| POWER FACTOR | ≧0.98(120Vac) ≧0.98(230Vac) ≧0.97(277Vac) | ≧0.98(120Vac) ≧0.98(230Vac) ≧0.97(277Vac) | ≧0.98(120Vac) ≧0.98(230Vac) ≧0.97(277Vac) | Full-load |
| THD | ≦6.0%(120Vac) ≦6.0%(230Vac) ≦9.0%(277Vac) | ≦6.0%(120Vac) ≦6.0%(230Vac) ≦9.0%(277Vac) | ≦6.0%(120Vac) ≦6.0%(230Vac) ≦9.0%(277Vac) | Full-load |
OUTPUT | VOLTAGE RANGE | 30~56V | 30~56V | 30~56V | |
| CURRENT RANGE | Max 16.7A | 0~16.7A | 0~16.7A | |
| MAXIMUM NO-LOAD VOLTAGE | ≤58V | ≤58V | ≤58V | |
| EFFICIENCY | ≥90.0% @120Vac ≥92.0% @230Vac ≥93.0% @277Vac | ≥90.0% @120Vac ≥92.0% @230Vac ≥93.0% @277Vac | ≥90.0% @120Vac ≥92.0% @230Vac ≥93.0% @277Vac | Full-load |
| CURRENT ACCURACY | ±5% | ±5% | ±5% | The actual≤±3% |
| RIPPLE VOLTAGE | ±1% max 2% | ±1% max 2% | ±1% max 2% |
Full-load |
| RIPPLE CURRENT | ±5% max 10% | ±5% max 10% | ±5% max 10% |
| TURN ON TIME | ≤2S | ≤2S | ≤2S |
LINEAR ADJUSTMENT RATE | ±1% | ±1% | ±1% | |
| LOAD REGULATION | ±3% | ±3% | ±3% | The actual≤±2% |
AUXILIARY POWER SUPPLY (OPTIONAL) | OUTPUT VOLTAGE | / | / | 12.8V±10% | |
| OUTPUT(CURRENT) | / | / | 300mA±5% | |
| | | | |
✤ Dimming Performance (three-in-one dimming)
| PARAMETER | LEAST VALUE | TYPICAL CASE | CREST VALUE | NOTE |
0-10V DIMMING (OPTIONAL) |
APPLIED PRESSURE |
0V |
0-10V |
15V | Over 15V may cause the internal components of the power supply to burn out, and the function of the power supply is abnormal |
| THE DIMMING RANGE | 8% | 10-100% | 100% | DIM + comes with an output of 100 uA current |
| PUSH THE DIMMING VOLTAGE | 0.8V | 1-10V | 10V | DIM + and DIM-no output |
RESISTANCE DIMMING (OPTIONAL) | EXTERNAL LIGHT ADJUSTMENT RESISTANCE |
8K Ω |
0-100KΩ |
100KΩ |
90 K Ω above is 100% output |
| THE DIMMING RANGE | 8% | 10-100% | 100% | DIM + comes with 100 uA constant flow output |
PWM AIMING (SELECTABLE) | PWM HIGH LEVEL | 9.5V | 9.6-10V | 10.5V | Dimmer PWM high level maximum |
| PWM LOW LEVEL | 0V | 0-0.35V | 0.5V | Dimmer PWM low level maximum |
THE PWM DIMMING FREQUENCY SEGMENT | 500Hz | 1KHz | 2KHz | Best job at 1 KHz |
| PWM DUTY CYCLE | 7% | 10-100% | 100% | DIM + and DIM-no output |
| THE DIMMING RANGE | 8% | 10-100% | 100% | DIM + comes with 100 uA constant flow output |
| THE DIMMING SHUT DOWN | TURN OFF THE VOLTAGE | 5% | 6% | 7% | According to the voltage, PWM, resistance ratio |
| CUT-IN VOLTAGE | 6% | 7% | 8% |
|
Note: 1. When using PWM or voltage dimming, please note that the
dimmer controller is set at 10% to the lowest dimming value, and be
set to close below 10%, and the lower limit is not lower than 8%!
For other dimming methods, please also refer to this method.
2. When the resistance is used for parallel dimming (parallel light
modulation), the number of paralle units is: N, then the resistance
for dimming~is: 90 KΩ / N, and the dimming resistance value must be
greater than the calculated value, then 8%~100% dimming can be
realized.
3. When the dimmer is used for dimming, when 20% of the power is
input, the power supply may have slight noise and water ripple
phenomenon. At this time, the power supply enters the light load
and high efficiency frequency jump mode, which is a normal
phenomenon.
Applications:
The LED Grow Light Driver product is suitable for both indoor and
outdoor applications. Its input voltage ranges from 120-277VAC,
making it available and compatible to different voltage settings.
The LED Grow Light Driver product dimensions of 420mm X 90mm X
45mm, making it easy to install and handle. It also has an IP
Rating of IP67, making it waterproof and resistant to dust and
other particles.
The LED Grow Light Driver product is compatible with different LED
grow light systems. It ensures that the LED grow light system
operates at an optimal level and provides the necessary power and
voltage needed for the plants to grow effectively. The LED Grow
Light Driver product is also energy-efficient and can save up to
50% of energy compared to traditional lighting products.
The LED Grow Light Driver product is suitable for different
occasions and scenarios. It is ideal for indoor gardening,
hydroponics, greenhouse gardening, and vertical farming. It can
also be used for outdoor gardening, street lighting, and landscape
lighting. With its waterproof and dust-resistant feature, the LED
Grow Light Driver product can withstand different weather
conditions, making it suitable for outdoor use.
In conclusion, the LED Grow Light Driver product from ANROFU is an
excellent product for different LED grow light systems. It is
certified and meets different market standards, making it a
reliable and efficient product for different occasions and
scenarios. With its energy-saving feature, waterproof and
dust-resistant feature, and input voltage compatibility, the LED
Grow Light Driver product can provide optimal growth for plants and
save energy costs.
Support and Services:
The LED Grow Light Driver product comes with technical support and
services to ensure optimal performance and reliability. Our team of
experts is available to assist with any product-related inquiries
or issues. The following are the technical support and services
provided:
- 24/7 customer support
- Product installation guidance
- Troubleshooting assistance
- Product updates and firmware upgrades
- Product repair and replacement services
We are committed to providing top-notch technical support and
services to our customers to ensure their satisfaction with our LED
Grow Light Driver product.
